How to Care for Resin and Crystal Wall Art

Epoxy resin and crystal wall art is designed to be seen in changing light. Its glossy surface and hand-applied details also deserve gentler care than an ordinary framed poster. The good news is simple: regular light dusting and sensible placement do most of the work.

Always follow any instructions supplied with your individual artwork. The guidance below is a cautious everyday routine for MDF-based decorative art finished with transparent resin and crystals.

Dust lightly and regularly

Use a clean, soft, dry microfibre cloth. Support the artwork securely and pass the cloth over the surface with almost no pressure. If crystals or raised details are present, do not catch the cloth on their edges. A clean, very soft cosmetic brush can help remove dust from small textured areas.

Regular light cleaning is safer than waiting until a greasy or heavy layer forms. Do not use feather dusters with hard shafts or rough disposable cloths that may drag particles across the glossy surface.

Avoid aggressive cleaning products

Do not use abrasive creams, scouring sponges, acetone, strong solvents, ammonia-based products, or alcohol cleaners unless the maker explicitly approves them. These products may dull, mark, or weaken decorative finishes. Never spray liquid directly onto the artwork because moisture can run towards the edges or fixing points.

If a mark cannot be removed with dry dusting, contact the seller or maker before experimenting. A small cleaning mistake can be more visible on a high-gloss surface than the original mark.

Control sunlight and heat

Display the artwork away from prolonged intense direct sunlight. Daylight is excellent for revealing the resin depth, but constant strong exposure can affect many decorative materials and printed colours over time. Side light or bright indirect light gives a beautiful effect with less stress on the surface.

Keep the piece away from radiators, fireplaces, cooking steam, and other strong heat sources. Avoid placing it where hot air blows continuously across the front or back.

Protect it from moisture

A resin surface may appear sealed, but the entire artwork includes edges, the MDF base, hanging points, and decorative elements. Do not treat it as waterproof. Bathrooms with frequent condensation, very damp basements, and areas directly above a sink are not ideal.

If the room becomes humid, ventilate it and check that condensation does not collect on the surface or wall. Wipe only when the artwork is stable and the cloth is clean and dry.

Explore the hand-finished resin and crystal collection and check each product’s material details.

Prevent scratches and knocks

Do not lean the front of the artwork against a rough wall or place other objects on top of it. When it is temporarily stored, cover the front with a clean, non-abrasive layer and keep pressure away from crystals and raised decoration.

Remove rings, watches, or bracelets before handling a large piece. Hold it by the sides with clean, dry hands. Avoid lifting it by a hanging wire or a decorative element.

Move and transport it safely

• Wrap the front in a soft, clean protective layer.
• Add rigid protection so the MDF cannot bend during transport.
• Keep crystals and raised details free from concentrated pressure.
• Carry the piece vertically when practical and support it with both hands.
• Do not leave it in a hot vehicle or damp storage space.

For longer transport, use corner protectors and a box sized so the artwork cannot slide. Mark the package to indicate which side is the front.

Check the hanging point

Use wall fixings suitable for the wall material and the artwork’s weight. Plasterboard, masonry, and wood require different hardware. If you are unsure, ask a qualified installer. Check the fixing after moving furniture or if the artwork is accidentally knocked.

Do not hang valuable artwork directly above a bed, cot, or frequently used seat unless the fixing method is appropriate and secure.

A simple care schedule

• Every few weeks: inspect for dust and wipe lightly if needed.
• Every few months: check the edges, hanging point, and whether strong sunlight reaches the piece.
• Before moving: photograph the condition, protect the surface, and plan how it will be carried.
• After redecorating: wait until paint, dust, and building moisture have cleared before rehanging.

Frequently asked questions

Can I clean epoxy resin art with glass cleaner?

Do not assume that glass cleaner is safe. Formulas vary and may contain alcohol or ammonia. Use a dry microfibre cloth and ask the maker before applying any product.

Can I hang it in a bathroom?

A well-ventilated room with low condensation may be possible, but repeated moisture is a risk for the MDF base, edges, and hanging system. A dry living space is safer.

How do I remove dust around crystals?

Use a very soft clean brush and work gently without pulling at the decoration.

What if the surface is scratched?

Do not polish or sand it yourself. Contact the maker and send clear photographs for advice.

Care should be calm, not complicated

A soft cloth, careful handling, secure hanging, and protection from extreme heat, moisture, and direct sunlight will preserve most resin and crystal artwork. The rule is simple: when in doubt, stop and ask before using a chemical or repair method.

Continue with our guides to how resin transforms religious art and choosing the right piece for a modern home.

When to contact the maker

Ask for advice if you notice lifting decoration, a deep scratch, a cloudy area, movement at the edge, or damage after transport. Send photographs taken in natural light and describe what happened. Do not attempt a home repair with glue, polish, heat, or additional resin. Early professional guidance is usually safer than an improvised correction.